Product Home / Product  / PJ-30MT

High Pressure Coolant System for Lathe | PJ-30MT

PJ-30MT

High pressure coolant system for lathe


There are several benefits over traditional methods in the application of High –pressure coolant when turning with this system, including:

      ★ CE Certified
      ★ Safe, Efficient and Economical
      ★ The ability to increase cutting speed by 20 percent in aerospace materials, such as titanium and nickel alloys, while maintaining the same cutting distance.
      ★ Energy saving and environmental protection.

Coolant System for Lathe

■ PJ-saving system (Patented high-performance & low-cost of material filtration system.)
■ Modular PCB, easy to maintenance.
■ Intuitive control panel, easy to operation.
■ With tank design to reduce heat and foaming.
■ Water base coolant, oil ratio 1%.
基本規格表

基本規格表
Specification

 

 

適用液體
Fluid type

cSt

水基切削液 Water base coolant
油基切削液(黏度係數15-32cSt) Oil base coolant (viscosity 15-32cSt)

最大工作壓力
Max working pressure

Bar

70 Bar

100 Bar

140 Bar

最大流量
Max flow rate

Liter / min

30 Liter / min

27 Liter / min

24 Liter / min

出水口數目
Number of ports

Port

1 (標準) (Stander)

過濾精度
Filtration

µ

5 µ單過濾器 Single filter

水箱容量

Tank capacity

Liter

140 Liter

尺寸 (長х寬x)

Dimension (DxWxH)

Mm

1271x550x1320 mm

重量

Weight

kg

300 Kg

選配功能
Option

 

 

 

 

1. 油冷機 Oil chiller
2. 2~8
個出水口 2~8 ports outlet
3.
雙過濾罐 Dual filter

4. 離心過濾 Centrifugal filtration

5. 消泡裝置 Anti-foaming